28
Item Specification
Phillips screwdriver M4
Marker
-
Level
-
Electric drill Drill bit: φ12
Wrench Opening: 16 mm
Spare parts
Item
Quantity Specification
Source
Grub screw 2 M4×10
Delivery scope
Bolt assembly 4
M10
Delivery scope
step 1 Assemble the mounting-bracket by using the connecting bar.
step 2 Place the assembled mounting-bracket onto the PV bracket with the distance between the
mounting-bracket and the ground shown in the figure. Adjust the angle with a level and mark
positions for drilling holes. Drill the holes by using a electric drill.
step 3 Secure the mounting-bracket with bolts.
4 Mechanical Mounting User Manual
To Next Page