Sungrow SH5T - WiNet-S2 Connection; WLAN Communication

60
6.8.1 WiNet-S2 Connection
The WiNet-S2 module supports Ethernet communication and WLAN communication. It is
not recommended to use both communication methods at the same time.
(A) Inverter (B) Router/Switch (C) iSolarCloud server
(D) iSolarCloud App (E) iSolarCloud
(1)
Internet (2) Local access (3) Remote
For details, see the quick guide for the WiNet-S2 module. Scan the following QR code for
the quick guide.
6.8.1.1 WLAN Communication
step 1 Remove the waterproof lid from the WLAN terminal.
step 2 Install the module. Slightly shake it by hand to determine whether it is installed firmly, as
shown below.
6 Electrical Connection User Manual