EasyManua.ls Logo

sunjoe TJ601E - User Manual

sunjoe TJ601E
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2015 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
A Division of Snow Joe
®
, LLC
Model TJ601E
OPERATOR’S MANUAL
SAVE THESE INSTRUCTIONS
18-INCH 9-AMP ELECTRIC
TILLER + CULTIVATOR
Form No. SJ-TJ601E-880E-MR1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this garden tiller + cultivator
must read, understand, and follow these instructions in their
entirety. Failure to follow these instructions may result in
ELECTRIC SHOCK, FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cords immediately.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls.
5. Use the right tool – Do not use this machine for any job
except that for which it was intended.
6. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
7. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
8. Avoid accidental starting – Do not carry the garden tiller
+ cultivator with your nger on the switch. Make sure the
switch is o before plugging in or unplugging the unit.
mCAUTION! Moving parts will continue to run for several
seconds after turning o the machine.
9. Do not abuse the cord – Never carry the garden tiller +
cultivator by the cord or yank the cord to disconnect it
from the receptacle. Keep the cord away from heat, oil,
and sharp edges.
10. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
11. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
12. Do not overreach – Keep proper footing and balance at
all times.
If the tiller + cultivator strikes a foreign object, follow these
steps:
• Stop the electric tiller + cultivator.
• Inspect for damage.
• Repair any damage before restarting and
operating the tool.
13. Use safety glasses – Also use safety footwear, snug-
tting clothing, protective gloves, hearing, and head
protection.
14. Disconnect the tool – Disconnect the tiller + cultivator
from the power supply when it is not in use, before
servicing it, when changing accessories, and when
performing any other maintenance task.
15. Store idle tool indoors – When not in use, the tiller +
cultivator should be stored indoors in a dry and high or
locked-up place out of the reach of children.
16. Maintain the tiller + cultivator with care – Keep the
cutting edges sharp and clean for optimal performance
and to reduce the risk of injury. Inspect the extension
cord periodically and immediately replace it if damaged.
Keep the handles dry, clean, and free from oil and grease.
Follow the additional recommendations described in the
maintenance section of this manual.
17. Avoid dangerous environments – Do not use the tiller
+ cultivator in rain or in damp or wet locations. Do not
operate the tiller + cultivator in gaseous or explosive
atmospheres or use the tiller + cultivator near ammable
or combustible liquids. Motors in these tools normally
spark, and the sparks might ignite fumes.
18. Stay alert – Watch what you are doing. Use common
sense. Do not operate the tiller + cultivator when you are
tired or under the inuence of drugs, alcohol, or other
medication.
19. Check for damaged parts – Before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function.
1
Question and Answer IconNeed help?

Do you have a question about the sunjoe TJ601E and is the answer not in the manual?

Summary

Safety Instructions

General Safety Warnings

Essential safety precautions for tiller operation, including personal safety and work area requirements.

User Guidance

Training and Preparation

Familiarize yourself with the unit and prepare the work area for safe and effective tilling.

Operation and Safety Procedures

Guidelines for correct operation, handling, stopping, and safety during use.

Electrical Safety

GFCI Protection and Extension Cords

Ensuring proper electrical connections and using appropriate outdoor extension cords to prevent shock.

Maintenance and Storage

Double-Insulated Appliances

Understanding the requirements and servicing procedures for double-insulated electric tools.

Safety Symbols

Understanding Safety Icons

Explanation of various symbols used in the manual and on the product for safety awareness.

Product Overview

Component Identification

Familiarize yourself with the different parts and controls of the electric tiller and cultivator.

Assembly

Unpacking and Initial Assembly

Unpack the tiller, check contents, and begin assembly by connecting the handles.

Securing Handles and Cables

Steps to securely attach handles, cable guides, and power cables during assembly.

Operation and Adjustments

Intended Use and Wheel Adjustment

Understand the tiller's purpose and learn how to adjust wheel settings for cultivating depth.

Connecting to Power Supply

Guidelines for safely connecting the tiller to a power source for operation.

Operating Procedures

Tips for Safe Operation

Essential tips for operating the tiller, including power control, and safe tilling techniques.

Cleaning and Maintenance

General and Specific Cleaning

Procedures for cleaning the tiller's exterior, underbody, and working tools after use.

Maintenance and Safety Precautions

Guidelines for maintaining the tiller and essential safety checks before servicing.

Maintenance and Repair

Changing Tines and Power Cord

Instructions for replacing tines, managing the power cord, and basic repairs.

Storage and Inspection

Proper procedures for storing the tiller and inspecting it for wear and damage.

Support and Product Information

Storage, Recycling, and Accessories

Guidance on product storage, disposal, available accessories, and service contact information.

Model and Serial Numbers

Locating and recording model and serial numbers for service and reordering parts.

Customer Promise and Warranty

Warranty Conditions and Exclusions

Details on the product warranty, conditions of coverage, and items excluded from warranty.

Obtaining Parts and Service

Instructions on how to get replacement parts, contact customer support, and understand export policies.

Summary

Safety Instructions

General Safety Warnings

Essential safety precautions for tiller operation, including personal safety and work area requirements.

User Guidance

Training and Preparation

Familiarize yourself with the unit and prepare the work area for safe and effective tilling.

Operation and Safety Procedures

Guidelines for correct operation, handling, stopping, and safety during use.

Electrical Safety

GFCI Protection and Extension Cords

Ensuring proper electrical connections and using appropriate outdoor extension cords to prevent shock.

Maintenance and Storage

Double-Insulated Appliances

Understanding the requirements and servicing procedures for double-insulated electric tools.

Safety Symbols

Understanding Safety Icons

Explanation of various symbols used in the manual and on the product for safety awareness.

Product Overview

Component Identification

Familiarize yourself with the different parts and controls of the electric tiller and cultivator.

Assembly

Unpacking and Initial Assembly

Unpack the tiller, check contents, and begin assembly by connecting the handles.

Securing Handles and Cables

Steps to securely attach handles, cable guides, and power cables during assembly.

Operation and Adjustments

Intended Use and Wheel Adjustment

Understand the tiller's purpose and learn how to adjust wheel settings for cultivating depth.

Connecting to Power Supply

Guidelines for safely connecting the tiller to a power source for operation.

Operating Procedures

Tips for Safe Operation

Essential tips for operating the tiller, including power control, and safe tilling techniques.

Cleaning and Maintenance

General and Specific Cleaning

Procedures for cleaning the tiller's exterior, underbody, and working tools after use.

Maintenance and Safety Precautions

Guidelines for maintaining the tiller and essential safety checks before servicing.

Maintenance and Repair

Changing Tines and Power Cord

Instructions for replacing tines, managing the power cord, and basic repairs.

Storage and Inspection

Proper procedures for storing the tiller and inspecting it for wear and damage.

Support and Product Information

Storage, Recycling, and Accessories

Guidance on product storage, disposal, available accessories, and service contact information.

Model and Serial Numbers

Locating and recording model and serial numbers for service and reordering parts.

Customer Promise and Warranty

Warranty Conditions and Exclusions

Details on the product warranty, conditions of coverage, and items excluded from warranty.

Obtaining Parts and Service

Instructions on how to get replacement parts, contact customer support, and understand export policies.

sunjoe TJ601E Specifications

General IconGeneral
Power6.5 Amp
Tilling Width16 in
Tilling Depth8 inches
Weight27.1 lbs
Tines4 steel tines
MotorElectric
Blades4 steel tines
Warranty2 years
HandleFoldable

Related product manuals