Sunlighten Amplify II Assembly Instructions

STEP 3
As you insert each wall segment, you will insert the
U-clips in the pre-drilled holes in the corner .
This will keep the walls sealed together.
The front wall will be inserted next. Be careful of the
glass door and panel as you insert the wall.
Place right wall on the right side of floor panel .
This wall panel should sit flush once properly seated.
Make sure no gaps are visible in the corner of the two
walls as you insert it. It should be inserted flush.
STEP 4
H
G
E
3
3
G
H
E
3
sunlighten.com/gb-en

Sunlighten Amplify II Specifications

General

Brand	Sunlighten
Model	Amplify II
Category	Plumbing Product
Language	English