PRE-INSTALLATION
PRE-INSTALLATION CHECKLIST
1. Haveacertiedelectricianinstalladedicatedoutletforthesauna.
Failure to do so will affect the operating performance of the sauna.
2. Remember your sauna should be assembled by 2 or more people.
3. Donotplaceplumbingorplumbingxturesinthesauna.
4. Keep all liquids away from the heating panels and electronics.
5. Install sauna on a level surface.
6. Install sauna in an area that is dry and protected from the weather.
7. Keepammableobjectsandcorrosivechemicalsubstancesaway
from the sauna.
8. Installation of the sauna in an area below standard room temperature
can increase warm up time.
READ BEFORE OPERATING
To reduce risk associated with hazardous voltage:
•
Unplug the sauna from electrical outlet before storage or when not in use
for expanded periods of time.
•
Do not operate the sauna if its not on a dedicated electrical circuit, or has
a damaged power cord/plug.
•
If the sauna is not working properly or an odor persists, immediately unplug
the sauna.
•
Do not leave the sauna unattended while heating for longer than the sauna’s
pre-set time periods.
•
Nevercoverholesoroorgratewithtowels,mats,garments,etc.
5
To Next Page
Loading...
Need help?
General
