If you have any questions, you can contact us in the following ways:
Phone: 1-877-292-0020
Live Chat on our website or view FAQs: www.sunlighten.com/customer-service
DM on social: facebook.com/SunlightenSaunas or instagram.com/sunlightensaunas/
mPulse Power Box Installation Guide mPulse Power Box Installation Guide
Step 10
Move back to the right edge of the power box and disconnect the back wall wires: the G2
power cable from the B1 connector, the sensor cable from the B5 sensor connector,
and the G31 NIR connector from the B6 connector.
Congratulations! All connections will now be separated for removal of the power box. To
install your replacement power box, you can reverse the same steps making the connections
described above.
Please see the diagram on the next page for which connections to pair as a reference.
To Previous Page
Loading...
