13
ISSUE SOLUTION
An electrical component
is not working after
assembling
Check all connections - A newly assembled unit with a non-functioning
electrical component (control panel, heater panels, lights, speakers) will
most likely have a missed or loose connection.
Sauna has no power There could be a tripped breaker due to a power surge or not being
plugged into a dedicated outlet. Flip the breaker switch (a black reset
button located to the left of the power box on the roof.) If there is still no
power, check the power cord connections on the roof and make sure they
are secure. Also verify the outlet power.
Slow warmup time Ensure each wall panel is heating and that you have the CORRECT
electrical specs on a DEDICATED CIRCUIT
TROUBLESHOOTING GUIDE
For other troubleshooting questions, please contact customer care at 913.754.0831 x7.
To Next Page
Loading...
Need help?
General
