5
PRE-INSTALLATION
INSTRUCTIONS
PRE-INSTALLATION
1. Have a certified electrician install a dedicated outlet for sauna.
Failure to do so will void all warranty.
2. Remember your sauna should be assembled by 2 or more people.
3. Do not place plumbing or plumbing fixtures in the sauna.
4. Keep all liquids away from the heating panels and electronics.
5. Install sauna on a level surface.
6. Install sauna in an area that is dry and protected from the weather.
7. Keep flammable objects and corrosive chemical substances away
from the sauna.
8. Installation of the sauna in an area below standard room temperature
can increase warm up time
WARNING
To reduce risk associated with hazardous voltage & fire:
• Unplug the sauna from electrical outlet before storage or when not
in use for expanded periods of time
• Do not operate the sauna if it is not on a dedicated electrical circuit,
or has a damaged power cord/plug
• If the sauna is not working properly or an odor persists, immediately
unplug the sauna
• Do not leave the sauna unattended while turned on, or in use
• Never cover holes or floor grate with towels, mats, garments, etc.
To Next Page
Loading...
Need help?
General
