© 2024 SunMan (Zhenjiang) Company Limited. All rights reserved. Specifications included in this manual are subject to change
without notice.
www.sunman-energy.com
version SMH-2024B page23 / 29
2. Remove the wrap and external strapping:
When unboxing, ensure there is enough
space on the side with the solar cell markings
for inserting anti-tip brackets.
Find a support, such as another box of
modules or a wall, for pre-tilting during
unboxing.
Be extra cautious with safety if there is wind,
especially strong winds. It is advised not to
unpack or transport modules in such
conditions, and securely fasten any
unpacked modules.
Locate the joint of the strapping. By pulling
the ends of the joint in opposite directions
with both hands, it can be easily separated.
To Next Page
Loading...
