© 2024 SunMan (Zhenjiang) Company Limited. All rights reserved. Specifications included in this manual are subject to change
without notice.
www.sunman-energy.com
version SMH-2024B page22 / 29
1. Check the condition of the goods and
unload the truck:
Ensure the external strapping is intact and
secure.
Do not unload during rain. Cardboard boxes
become soft and disintegrate when getting
wet, posing a safety risk.
Ensure the ground is level and stable for
placing the packages to prevent tipping.
Use a forklift to move palletized boxes to
the work area, gently pulling modules to
avoid rough jostling and vibrations during
movement.
When using the forklift, load and unload
goods smoothly and securely. The weight of
the goods must be evenly distributed on
both forks. Keep the handle in the middle,
stationary position, and do not operate both
handles simultaneously.
If the module needs to be hoisted for
unboxing at a height, use a flat lifting strap
to pass through and wrap around from both
sides of the wooden pallet's bottom (as
shown in the diagram).
When wrapping with the flat lifting strap,
spread it out so that it fully adheres to the
surface of the wooden box, avoiding any
folding or twisting.
To Next Page
Loading...
