Sunman Dragonfly - Page 27

© 2024 SunMan (Zhenjiang) Company Limited. All rights reserved. Specifications included in this manual are subject to change
without notice.
www.sunman-energy.com
version SMH-2024B page25 / 29
TM
3.
 Insert the connecting axle into the slot to
form a suitable pre-tilted surface.
 Use the front and back slots to adjust the
pre-tilt angle by inserting into different
slots as needed.
5. Insert the anti-tip bracket:
 The anti-tip bracket should be installed on
the side with the solar cells.