◼ Do not stand, climb, walk or jump on modules.
◼ Do not allow sharp objects to touch the modules. Scratches can directly affect
the safety of the modules.
◼ Do not leave the modules unsupported or unsecured.
◼ Do not change the wiring method of the bypass diode.
◼ Keep all electrical connections clean and dry.
Product identification
◼ Barcode: each individual module has a unique serial number. The serial
number has 21 digits. The 1st to 4th digits are the module type for internal use,
and 5th to 8th digits are the year code, and the 9th and 10th digits are the month
code, and the 11th and the 12th digits are the week code, and the 13th and 14th
digits are the month code, and the 15th to 17th digits are order number, and the
18th to 21th digits are the sequence codes. For example,
xxxx20210415xxxxxxxxx means the module was made in the 15th week of
2021. Each module has only one bar code. It is permanently attached to the
interior of module and is visible from the top front of module. This bar code is
inserted prior to lamination.
To Next Page
Loading...
