Safety Precautions
For industrial and
commercial use
Please read all instructions
before using the machine
• For indoor use only. Do not expose the machine in rain
• Do not regard the machine as a toy. Be careful when children are around during operation.
• Please use the machine according to the instructions in this manual.
• Please use the accessories recommended by the manufacturer.
•
Please charge the battery in a ventilated place. The gas released during charging may ignite in a
narrow space. To avoid explosion, please open the top cover and ensure the battery cover is in place
when charging.
•
Before adjusting or repairing the machine, disconnect all positive and negative battery terminals.
The accidental starting of traction motors, suction motors and electrical components may cause
personal injury.
• Battery acid can cause eye or skin damage. Before installing or charging the battery, please wear
goggl
es, gloves, and protective clothing.
• If the charger does not work properly (due to being dropped, damaged, placed outside the house or
soake
d in water), please return it to the after-sales service center.
• Do not pull the plug or touch the machine with wet hands.
• Do not put any objects into the machine port, keep it unblocked.
• Keep the machine away from dust, thread residues, hair and anything that may reduce airflow.
• Keep hair, loose clothing, fingers and any other body parts away from machine openings and
moving par
ts.
• Make sure the main power switch is turned off before removing the mounting brush and brush
connectors.
• Do not operate the machine if you are tired, drunk or taking drugs.
• Please operate behind the machine.
• Be careful when using electrical terminals as short circuit may cause burns.
• Do not put the machine on the slope.
• Keep the machine away from flammable liquid or gas, otherwise it will cause explosion or flash fire.
• Make sure all safety devices are in place and operated correctly before starting the machine.
• When leaving or repairing the machine, put the machine on a flat ground, turn off it and take out the
key.
• When repairing the machine, please use the parts supplied or approved by the manufacturer.
• Do not modify the original design of the machine.
To Next Page
Loading...
