Sunmi L2 User Manual

Shanghai Sunmi Technology Co., Ltd. Sweeping Development
Sunmi Scanner User Guide

Sunmi L2 Specifications

General

Wi-Fi	802.11 a/b/g/n
Bluetooth	Bluetooth 4.0
Operating System Compatibility	Android
Operating Temperature	0℃~45℃
Storage Temperature	-20℃~60℃
Scanner	2D Imager

Summary

Sunmi Scanner User Guide Introduction

Connecting Sunmi Scanner Service via AIDL

Understanding AIDL

Defines Android's internal process communication interface language.

Establishing AIDL Connection Steps

Steps to establish a connection using AIDL, including adding files and binding the service.

AIDL Scanner Interface Methods

Interface methods for controlling the scanner, including scan, stop, and key events.

Sunmi Scanner Settings Configuration

Clearing Scanner Configuration

How to clear the scanner configuration by accessing the menu and 'Clear Config'.

Character Set Selection

Selects the character set for the scanner, with options like UTF-8, GBK.

Prompt Mode Configuration

Configures prompt mode for acoustic and vibration alerts.

Data Output Mode Settings

Configures data output modes like Keystroke, Broadcast, or No text output.

Broadcast Reception Introduction

Introduces broadcast reception for scanner data, including listening broadcast actions.

Scan Trigger Settings

Configures the scan trigger, with the default hover button being off.

Scan Mode Selection

Selects the scan mode, with the default being trigger mode.

Prefix and Suffix Settings

Configures prefix and suffix settings, supporting special characters.

Decoder Configuration

Allows enabling or disabling specific identification codes for scanning.

Decoder Parameters Setup

Sets parameters for decoders, including min/max length and check digit verification.

Advanced Data Formatting Rules

Configures advanced data formatting rules for character replacement.

Sunmi Scanner Appendices