Need help?Do you have a question about the Sunny Health & Fitness SF-BH6629 and is the answer not in the manual?
General| Product Name | Sunny Health & Fitness SF-BH6629 |
|---|---|
| Category | Fitness Equipment |
| Type | Indoor Cycling Bike |
| Drive System | Belt Drive |
| Adjustable Seat | Yes |
| Transport Wheels | Yes |
| Display | LCD Monitor |
| Material | Steel |
| Adjustable Handlebars | Yes |
Attach the cushion to the adjustable tube using hex bolts and washers, then attach handlebars using hex bolts, washers, and nuts.
Insert the back stand tube into the back base tube and secure with hex bolts and washers.
Insert the front stand adjustable tube into the front base tube and secure with hex bolts and washers.
Insert foam tube through the leg support tube hole and place foam pads on the ends.
Attach back stand tube, insert lock pins, and attach leg support tube, ensuring all bolts and nuts are tightened.
Loosen the lock pin, adjust the tube to the desired height, and re-tighten the lock pin.
Pull out the lock pin, fold the bench, and re-insert the lock pin; the folded bench requires leaning against a wall.
Clean sweat, inspect/tighten hardware, check moving parts mobility, and clean parts with appropriate cloths.
Inspect all parts, hardware, and moving components; tighten or replace as needed.
Inspect frame and inner working components for wear, tear, or damage; perform maintenance or replacement.
To Next Page