Sunny Health & Fitness SF-BH6802 User Manual

POWER RACK
SF-BH6802
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions.
Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
CONTACTED US:
support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).

Sunny Health & Fitness SF-BH6802 Specifications

General

Product Type	Exercise Bike
Product Name	Sunny Health & Fitness SF-BH6802
Category	Fitness Equipment
Type	Indoor Cycling Bike
Resistance Type	Friction
Maximum User Weight	275 lbs
Weight Capacity	275 lbs
Drive System	Belt Drive
Pedals	Caged
Seat	Padded
Adjustable Seat	Yes
Adjustability	4-Way Adjustable Seat
Handlebar Adjustability	2-Way Adjustable
Transport Wheels	Yes
Display	LCD Monitor
Connectivity	No
Resistance System	Adjustable Resistance

Summary

IMPORTANT SAFETY INFORMATION

Health and Personal Safety

Consult physician, monitor body signals, wear suitable clothing, keep clear of moving parts.

Equipment Placement and Integrity

Use on a flat surface with clearance, ensure secure tightening, check for damage, and address defects.

Usage and Storage Guidelines

For adult use only, not for therapeutic use, store properly, and follow weight capacity.

Exploded Diagram

Hardware and Tools Package

Parts List

Ordering Replacement Parts

Instructions for ordering replacement parts, requiring model, product name, and part number.

Assembly Instructions

Step 1: Attach Stabilizers to Center Stabilizer

Connect Left and Right Stabilizers to the Center Stabilizer using specified bolts, washers, and nuts.

Step 2: Attach Support Tubes

Attach Support Tubes to the Right and Left Stabilizers using specified bolts, washers, and nuts.

Step 3: Attach Upright Posts and Pull Up Bar

Mount Upright Posts to stabilizers and attach the Pull Up Bar and plates using specified hardware.

Step 4: Attach Locking Plates

Secure Locking Plates to the Right and Left Stabilizers using specified bolts, washers, and nuts.

Step 5: Attach Band Pegs

Install Band Pegs onto the Right and Left Stabilizers using specified bolts, washers, and nuts.

Step 6: Attach Pivot Bracket and Landmine

Mount Pivot Bracket to Center Stabilizer and attach Landmine to the bracket using specified hardware.

Step 7: Attach Plate Holders and Bar Holders

Install Plate Holders, Bar Holders, and Safety Bars onto Upright Posts at desired heights.

Maintenance and Usage Guidelines

Optional Floor Anchoring

Discusses optional floor anchors for increased stability, with installation hardware not included.

Barbell Weight Handling Warning

Advises balancing barbell weight and not storing it loaded on the rack for extended periods.

Maintenance Schedule

Outlines daily, weekly, and monthly checks for cleaning, tightening, and inspecting components.