To Next PageTo Next Page
Need help?Do you have a question about the Sunny Health & Fitness SF-E905 and is the answer not in the manual?
General| Type | Elliptical Trainer |
|---|---|
| Resistance Type | Magnetic |
| Resistance Levels | 8 |
| Weight Capacity | 220 lbs |
| Stride Length | 11 inches |
| Material | Steel |
| Handlebars | Fixed and Moving |
| Display Metrics | Time, Speed, Distance, Calories, Pulse, Scan |
| Pulse Measurement | Yes |
| Display | Digital |
| Batteries Required | 2 AA |
Connects front and rear stabilizers to the main frame using specific bolts, washers, and nuts.
Connects sensor wires and attaches handlebar post to the main frame using bolts.
Connects swing bars, pedal support tubes, and pedals to the frame using various bolts and nuts.
Attaches pedals to pedal support tubes using hex bolts, flat washers, and nylon nuts.
Attaches armrests to handlebar post and handlebars to swing bars with bolts and nuts.
Connects pulse sensor and upper sensor wires to the meter and attaches the meter to the handlebar post.
Addresses issues with tension cable connection and meter display/functionality.
Guides on resolving mechanical noises by checking bolts, washers, and applying lubricant.
Details adjusting screw for pedal resistance and belt cover placement to avoid rubbing.
Instructions on adjusting the leveler caps to ensure the machine is stable and not wobbly.
Explains the function of MODE, SET, and RESET buttons for meter operation.
Describes SCAN, TIME, SPEED, DISTANCE, CALORIES, TOTAL DISTANCE, AUTO ON/OFF, PULSE RATE, and ALARM functions.
