Do you have a question about the Sunny Health & Fitness SF-T7723 and is the answer not in the manual?
Brand | Sunny Health & Fitness |
---|---|
Model | SF-T7723 |
Category | Fitness Equipment |
Language | English |
Information required to accurately identify replacement parts needed for the product.
Attach Stabilizer Tubes (No. 3) to Bottom Frame (No. 2) using specified bolts and washers.
Grasp rear end of Main Frame (No. 1), press Cylinder (No. 15) and lower Main Frame to ground.
Attach Main Frame (No. 1) to Bottom Frame (No. 2) using Round Knob (No. 36) and Flat Washer (No. 37).
Attach Rear Handlebars (No. 4) to Front Handlebar (No. 5) and Bottom Frame (No. 2) with bolts and washers.
Attach Middle and Bottom Handlebars (No. 6, 7) and tighten all previously installed bolts.
Tighten and secure the Bolts (No. 33) on the two sides of Bottom Frame (No. 2) with Spanner (No. 47).
Instructions on how to tilt the treadmill using the rear handlebar and foot for support.
How to hold the rear handlebar and tilt to engage transportation wheels for movement.
Instructions on adjusting the walking belt alignment using hexagon socket screws if it drifts.
How to apply lubricant to the treadboard and underside of the walking belt to reduce friction and wear.
Instructions on how to adjust the treadmill's resistance levels using the Tension Knob (No. 14).