To Next Page
M
Michael Knight IIIAug 7, 2025
What to do if Sunrise Lathe motor cannot start?
- BBrandy PatrickAug 7, 2025
If the motor of your Sunrise Lathe doesn't start, there are several potential causes. First, check the power source to ensure it's properly connected. Verify that the isolator switch is in the ON position. Make sure that both emergency buttons are released by turning the knob to the right. Inspect the motor power cable for proper connection and replace it if it's worn. Also, check if the motor circuit breaker has tripped to the OFF position and reset it if necessary. Examine the fuse and replace it if broken. Finally, the motor, magnetic switch, or transformer might be broken, requiring replacement.
General
