- 2 -
SXJS3018 DOUBLE-DECK SCISSOR LIFT
Packing, Handing and Storage
1. Packing
a) The lift packed in 2 separate parts, packed by unbreakable material.
b) Motor power unit and electric control box packed separated in paper
cartons.
2. Handing
a) Using crane or forklift by gravity centre of the machine during handling.
b) Loading bearing stress of sling used for handling should be more than 2 ton.
c) Avoid damager or deformation for equipment during handling.
d) Take suitable protective measurements in case of rain or snow during
handling.
3. Storage and stacking of packages
a) Packages must be stored in a covered place, out of direct sunlight and in low
humidity, at a temperature between -10°C and +40°C.
b) Stacking is not recommended: the package’s narrow base, as well as its
considerable weight and size make it difficult and hazardous.
To Next Page
Loading...