SunStar KM-640UBL-7 - 470 Motor Controller; Clutch Motor; Peripheral Automation Devices (Optional)

9
Servo motor
470 motor
UsageModelOptional device
6) Peripheral automation devices (optional)
AUTO KNEE LIFTING SYSTEM
PRODUCTION COUNTER
MATERIAL EDGE SENSOR
STANDING PEDAL
SCOUND-1
SEDG-1B
SEDG-2B
SPDL-1
SPDL-2
A counting device, which indicates the completed quantity on the program
unit panel, including added, subtracted, corrected or remaining quantity
along with other performance rates.
A device that senses the edge or thickness of the sewing material to stop
the machine without manual pedaling. Available in two types: SEDG-1B
for edge sensing type and SEDG-2B for thickness sensing type.
An essential device when one person is operating multiple sewing
machines. Has different pedals for acceleration, thread trimming, presser
foot and ascending pedal. Types consist of SPDL-1 and EDPL-1 for fixed
speed, and SPDL-2 and EDPL-2 for variable speed.
SPF-7
A solenoid operating structure where the presser foot gets lifted
automatically with pedal reverse gear stage 1 operation.
4) 470 motor controller
MODEL
PC470
VOLT
1 : 110V
2 : 220V
MODEL
A
SUB CLASS
001
5) Clutch motor
MODEL
HEC-1701
HEC-1703
HEC-1705
HEC-1706
VOLT
1 Phase 220V
3 Phase 220V/380V
3 Phase 220V
1 Phase 220V
WATT
250W
250W
400W
400W
HERTZ
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz