SunStar SPS/A-Pattern Series - Page 103

103
D. Press any key to perform the test.
E. If you want to finish PWM test, press ESC key.
If you want to finish test menu, press ESC key.
F.
Back to the initial screen by pressing ESC key.
PWM output Test.
Press any key...
A.
Press MODE key.
B. After moving to “4. Machine Test”by using direction
keys , press ENTER key.
C. After moving to “5. LCD Test”by using direction
keys , press ENTER key.
D.
If you press a key, relevant key value appears
on the screen.
E. If you want to finish LCD test, press ESC key.
If you want to finish test menu, press ESC key.
F.
Back to the initial screen by pressing ESC key.
<< Main Menu >>
4. Machine Test
5. Pattern List
6. EMB Call
<< Test Menu >>
5.LCD Test
6.Keyboard Test
7.Input0 Test
<<< LCD Test >>>
3333322222
1-6) LCD Test
It is to test if LCD works properly. If you press a key, the relevant key appears on the screen.