SunStar SPS/A-Pattern Series - Page 136

136
Function No. : 044 Function Name : Standby time for completely lowered presser foot
Function No. : 045 Function Name : Standby time for completely uplifted presser foot
It is to set the standby time till the next step after the presser foot has been lowered.
Set the standby time till the next step after the presser foot has been lowered.
(Factory installed condition : " 152ms
" )
[Contents]
044. PF Down Time
0~1020ms
Setting
Value
It is to set up the standby time till the next operation after the presser foot has been lifted.
Set up the standby time until the next step after lifting the presser foot.
(Factory installed condition : " 152ms " )
[Contents]
045. PF Up Time
0~1020ms
Setting
Value