153
Function No. : 081 Function Name : Y-axis forward direction sewing limit set-up
The user can increase the Y-axis forward direction of the sewing limit
Set the size of Y-axis forward direction as desired. (At the time of the factory shipping,
machines are set in line with their sewing limit by type)
Ex: 6mm for 1306 type
081. YPLUS Limit
1~250mm
Setting
Value
[Contents] The user can expand the size of sewing limit in the program.
[Caution] The feeding axis must be changed in line with the size of sewing limit where
mechanical feeding is possible. If the user increases the set-up value in the program
and begins feeding, the machine can be severely damaged.
Function No. : 082 Function Name : Y-axis reverse direction sewing limit set-up
The user can increase the Y-axis reverse direction of the sewing limit
Set the size of Y-axis reverse direction as desired. (At the time of the factory shipping,
machines are set in line with their sewing limit by type)
Ex: -6mm for 1306 type
082. YMINUS Limit
-1~-250mm
Setting
Value
[Contents] The user can expand the size of sewing limit in the program.
[Caution] The feeding axis must be changed in line with the size of sewing limit where
mechanical feeding is possible. If the user increases the set-up value in the program
and begins feeding, the machine can be severely damaged.
Function No. : 083 Function Name : Quick origin search motion selection for 1811
As for SPS-1811 machines, origin search motion is performed due to reverse devices.
However, if there is no reverse device, search motion takes place very slowly. This quick origin
search motion function ensures fast origin search and feeding back to the
starting point of sewing.
Quick origin search motion is not in use (at the factory)
[Contents] Generally, search is done on overall sewing limit before implementation of origin
motion and feeding back to the starting point of sewing.
083. FFOrign 1811
1) DISABLE
Setting
Value
Quick origin search motion is in use.
[Contents] No search done on overall sewing limit. Starts with origin motion right away and
feeding back to the starting point of sewing.
2) ENABLE
To Next Page
Loading...
