18
F. The following shows an example of situations
where the safety mode is activated. Thread is
broken in the middle of sewing.
When the thread is sensed, an alarm is issued
and the OP Box displays the following
message. While the message is displayed on
the OP Box screen, Pedal Start Switch,
Clamp Up/Down Switch, and Keys of the OP
Box remain disabled in order to protect users.
Only when the exit key is entered, the
functions mentioned above are operable. To
cancel the safety mode, press “
EXE” on the
left bottom of the OP Box. When this key is
pressed, the sewing machine operation will go
back to normal.
While the safety mode is effective, the clamp
is located down.
G. To cancel this function, press EXE Key on
the OP Box. This is the message you can
see on the OP Box screen.
After the function is cancelled, the sewing
machine can be operated again.
Err18
Thread Broken!
Press EXE Key
Sewing is ready
OK!
H. Sewing can be started by pressing the Pedal
Start Switch.
NO:003 NOR_SEW
XS:100%
YS:100% SP:2000
BC:100 PC:0000
NO:123 NOR_SEW
XS:100%
YS:100% SP:1500
BC:004 PC:9084
To Next Page
Loading...
