23
O. For finishing a pattern generation, press MODE
key. Then, the upper feed plate moves to the
origin and comes to ascend. Press ESC key to
back to the initial screen.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
1-3) Program Example 3 : Generating the Double Curve Pattern
Input a curving spot that inclines largely among spots that pass on a curve. We give 5 curving lines for
examples here.
(-600,0)
(600,0)
(-300,200)
(300,-200)
(0,0)
A. Insert a USB flash drive into the terminal.
B. Press MODE key.
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
M
.
Press TEST key one more time and finish the
test sewing. Then, the upper feed plate comes to
descend and move to origin with the turning off
the READY LED.
N. Press WRITE key and input the number you
want to save by using digit keys, then press
ENTER key. Then, save the generated pattern
data in a USB flash drive as a relevant number.
(For example, if you want to save a pattern
number as 301, input [3][0][1].)
During saving the data, READY LED flickers.
If you want to save the pattern with the same
number, just press ENTER key, but if you
want to save it with another number, press ESC
key and save to the other number. After
finishing saving process, the upper feed plate
backs to the origin.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
015:PTRN WRITE
NO :301
To Next Page
Loading...
