30
1-5) ZigZag Shape Selecting Function to Generate ZigZag
It was made to select 4 kinds of “DIR” values from existing 0/1 to 0/1/2/3 among three parameters
inputting to create Line ZigZag, Curve ZigZag, Arc ZigZag, Circle ZigZag and accordingly ZigZag shapes
are classified into 4 type.
JUMP
X:-0650A
Y:00000A
N:001
JUMP NONE
X:-0650A N:00000
Y:00000A
Function Code?
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
C. Move to “2. Program”menu by using direction key
and press ENTER key. Then, the upper
feed plate comes down and moves the original
point.
A. Insert a USB flash drive into the terminal.
B. Press MODE key.
D. After pressing JUMP key, move to the coordinate
(for example:X:-0650 Y:00000) to locate by using
direction key. Then, press PNT SET key.
E. If you press EXE key, after calculation on
pattern data, feed plate moves according to the
calculated data.
<< Main Menu >>
2. Program <
3. Bobbin Wind
4. Machine Test
For DIR=0
For DIR=1
For DIR=2
For DIR=3
To Next Page
Loading...
