SunStar SPS/A-Pattern Series - Page 44

44
3-2) Program Example 5 : Change of Sewing Speed Within a Pattern
There are two ways to change sewing speed within a pattern.
1) Changing the sewing speed from an existing pattern data
2) Changing the sewing speed with creating new pattern data
※ Ref. : Several sections of speed change is available, but they should be within real sewing range.
Maximum speed varies depending on the pattern of the sewing machine.
3-2-1) Changing the Sewing Speed from an Existing Pattern Data
2000spm
P4
(0,0)
014:PTRN READ
NO :500
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
A. Insert the USB flash drive of a pattern that is
supposed to change the sewing speed.
B. Press MODE key.
C. By using direction keys , move to “2.
Program”menu, then press ENTER key.
At this time the upper feed plate descends, and
moves to the origin.
D. After pressing READ key, input the pattern
number that is supposed to change the sewing
speed by using digit keys, then press ENTER to
read the pattern.
(For example, to read the pattern number 500,
input [5][0][0].)
(1) Reading the Pattern that is Supposed to Change
the Sewing Speed
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
(0,0)
(JUMP)
(JUMP)
P3
P2
P1
P4
P3
P2
P1
R1
2000spm2000spm 2000spm
2000spm
500spm
2000spm
2000spm
Line
Line
2000spm 2000spm
R2