16
[ Fig. 9 ]
② SPS/A-1306(1507, 1310)
Power Supply Cable
Main Motor Cable
Encoder Cable
Synchro Cable
Step Motor Cable
Air Pressure Control Cable
Pedal Input Cable
Sensor Input Cable
Solenoid Output Cable
Operation Cable
Green
Black
Backside of Control Box
※ The number in parentheses indicates cable number.
See the Electric Connection Wiring Diagram.
[ Fig. 10 ]
I. Connect the connectors of the electric cords from the
machine to the control box.
[ Caution ]
① Hold the connector part to plug in and pull out the
cords.
② Have the power turned off before the cords are
plugged in or pulled out.
③ Make sure the plug cable does not get too close to
the “V”-Belt or other machine supplements.
Control Box