SunSun CPF-2500 User Manual

Operation Manual
Pressure Filter CPF Series
50105, 50123, 50977–50980, 50121, 51042–51044
Illustrations similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

SunSun CPF-2500 Specifications

General

Model	CPF-2500
Category	Water Filtration Systems
Flow Rate	2500 L/h
Max. flow rate	2500 L/h
Suitable for ponds up to	5000 L
Max Head	2.5 m
Voltage	220-240 V
Frequency	50 Hz
Power UV-C lamp	9 W
Hose connections	25 mm
Operating pressure max.	0.03 MPa

Summary

Safety Guideline

Electrical Connection

Commissioning

Technical Data

WilTec Pond Filter Functions

Hose Connections

Connecting to Water Inlet

Linking the pump to the filter's inlet.

Connecting to Water Outlet

Directing the cleaned water back to the pond.

Operating Principle

Filter Maintenance and Operation

Cleaning the Filter Sponge

Connecting the Pump

UV Unit Information

Information on the integrated UV lamp, its lifespan, and replacement.

Maintenance and Settings

Filter Operation Mode

Cleaning Operation Mode

Changing the Light Tube

Disposal Regulations