1. Unfasten the four clips on the upper filter
housing and gently pull to remove it.
2. If an inlet stepped hose nozzle is required,
remove the inlet guard.
3. Assemble and fit the inlet adaptor and
stepped hose nozzle as shown.
4. Replace the upper filter cage and fasten
the clips.
© by WilTec Wildanger Technik GmbH Item 51000–51011 Page 6
http://www.WilTec.de
http://www.aoyue.eu 12 2020-1
http://www.teichtip.de
To Next Page
Loading...
