SunTech Tango+ - Service Manual

Part # 80-0002-01 REV A
TANGO
®
+
SERVICE MANUAL
SunTech Medical, Inc.
507 Airport Boulevard
Morrisville, North Carolina 27560-8200
United States of America
Toll free: 800.421.8626
Phone: 919.654.2300
Fax: 919.654.2301
SunTech Medical, Ltd.
Oakfields Industrial Estate
Stanton Harcourt Road
Eynsham, Oxon OX8 1TS
United Kingdom
Phone: (44)1865-884234
Fax: (44)1865-884235

Summary

Introduction

Tango+ Inputs & Outputs

Operation Modes & Menu System

Maintenance Menu

Routine Maintenance

Verification of Pressure Calibration

Details the procedure for verifying the pressure calibration of the Tango+ device.

Pressure Calibration

Outlines the steps required to perform a full pressure calibration of the Tango+ unit.

Leak Rate Test

Explains how to conduct a leak rate test to ensure the pneumatic system integrity.

Timeout Check

Describes the procedure for performing a timeout check on the Tango+ device.

Overpressure Check

Non-Routine Maintenance Procedures

Disassembly & Re-assembly Procedures

Tango+ Main PCB Schematics

Tango+ Pump & Valve PCB Schematics

Tango+ Internal ECG PCB Schematics

SunTech Tango+ Specifications

General

Technology	Oscillometric
Species	Human
Measurement Site	Upper Arm
Memory Capacity	Up to 99 readings
Memory	Yes
Display Type	LCD
Power Source	4 AA Batteries
Connectivity	USB
Type	Automatic Blood Pressure Monitor
Weight	Approx. 1.1 kg (with batteries)
Dimensions	Approx. 150 x 120 x 70 mm