To Next PageTo Next Page
Need help?Do you have a question about the SunTech TANGO M2 and is the answer not in the manual?
General| Measurement Method | Oscillometric |
|---|---|
| Power Source | 4 AA batteries or AC adapter |
| Connectivity | USB |
| Display | LCD |
| Type | Upper Arm |
| Use | Professional |
| Measurement Site | Upper Arm |
| Accuracy (Pressure) | ±3 mmHg |
| Memory | Up to 99 readings |
| Device Type | Blood Pressure Monitor |
| Cuff Size | 22-32 cm (Adult) |
| Measurement Range (Pressure) | 0 to 300 mmHg |
| Measurement Range (Pulse) | 40-180 beats per minute |
| Accuracy (Pulse) | ±5% |
Explains various icons and symbols used on the monitor and in its literature.
Details the various input connections and components of the Tango M2 monitor.
Describes the output features of the Tango M2 monitor, such as the display and beeper.
Covers combined input/output connections like pneumatic cables and serial/USB ports.
Explains the standard menu-driven operation using the keypad or host system.
Introduces the hidden diagnostics menu for maintenance and advanced settings.
Describes the procedure to verify the pressure calibration accuracy of the monitor.
Details the steps required to properly set the calibration for the Tango M2.
Outlines the procedure for testing the pneumatic system's leak rate.
Explains how to perform the safety timeout check for the blood pressure monitor.
Details the steps for conducting the overpressure safety check on the device.
Provides instructions for internal inspection, including warranty considerations.
Step-by-step guide for disassembling the Tango M2 monitor, noting variants.
Detailed instructions for reassembling the Tango M2 monitor after service.
