Sunvic SELECT 207 XLS User Manual

Select 207 XLS User / Installation Instructions Page 3 of 8
Press the SET button the clock icon on the screen will flash. Press the +/- buttons to adjust
the time. Hold down button to change time quicker.
Press SET button till the Y:00 icon (year) appears and the letter D flashes. Press the +/-
button to set the year. Press NEXT, N:00appears (month). Press +/_ button to set month.
Press Next. d:00 appears (day). Press +/- button to set day.
NOTE:The unit will automatically return to run mode if a period of 5 minutes passes without
any buttons being pressed.
CHANGING PROGRAMME TIMES
The built in programmes for Central heating and Hot water can be easily changed to better
suit your needs.
If the unit is installed as a 7 day programmer, the initial programme displayed will be for
Monday. You can go to any day of the week by pressing the DAY button repeatedly. The
ON/OFF times can be changed for each day as above in the “changing programme times”. If
you press the COPY button, the current programme will be copied onto the next day.
If the unit is installed as a 5 day/2 day programmer, the initial programme displayed will be for
Monday to Friday. Pressing the DAY button will take you to the programme for Saturday and
Sunday. The ON/OFF times can be changed for each day group as above in the “changing
programme times”. If you press copy, the current programme will be copied onto the next day
group.
If the unit is installed as a 24 hour programmer, the built in programme will be the same for
each day. The COPY function is not required if installed as a 24 hour programmer.
To return to RUN mode, press the SET button until the display indicates run on the display.
To change HOT WATER programme.
Press SET button until the ‘tap’ symbol appears and proceed exactly as Central heating
above.
NOTE: It is not possible to copy Sunday to Monday.
For convenience, to allow for programmes to go past midnight, the programme day is from
03:00am to 02:50 am the next day.
To change the Central heating programme, press SET
until the radiator icon flashes in the screen and 1 ON
appears. This indicates the time shown on the display is
the first ON time. Change this to the required ON time by
pressing the +/- buttons.
Press NEXT button, the display will now show 1OFF.
Change as before.
Use NEXT and +/- buttons in this way to programme the
second time period.
If the unit is set for 3 ON/OFF periods, the number 3 will
appear . This is set in exactly the same way as the
previous first and second time period.
Setting the Time and Date

Sunvic SELECT 207 XLS Specifications

General

Brand	Sunvic
Model	SELECT 207 XLS
Category	Switch
Language	English