EN
AD
(Fig.) The setting keys are located beneath the display
B
C
121
This is the only exception for which work
may be performed on the open unit under
voltage!
Remove the cabinet cover to carry out the
configuration.
The following settings can be performed
using the illustrated keys:
· Address of the solar inverter: address
«1» is stored in the memory at the
factory. In the case of several solar inver-
ters, consecutive numbering must be set.
For three solar inverters e.g. the addres-
ses «1», «2» and «3».
· Date
· Time
· Language (German, English, French,
Spanish, Italian)
To Next Page
Loading...
