EasyManua.ls Logo

SUNWIND Smart Michigan - Installing the Gas Cylinder

SUNWIND Smart Michigan
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sunwind Gylling AS
Installing the gas cylinder
(The propane gas cylinder is not provided with the appliance.)
Agascylindercomplyingwiththerequirementslistedinsection5.2mustbeobtainedbefore
thegrillcanoperate.ConnecttheLPcylindertothegrilloutdoorsonly.
Readandfollowalldirectiononthecylinder.
1.Turntheburnercontrolknobto“OFF”position.
2.Removetheprotectivecapsfromthecylindervalveandcouplingnut,ifpresent.
3. Opengrilllidandfoldright-handgrillshelfoverontogrillgrate
4.Graspthegrillhandlenearesttotheregulatorwithonehand,andwiththeotherhand
pushthecylinderintothethreadedregulatorconnectorandturnclockwiseuntiltight.
5.TIGHTENBYHANDONLY.Donotusetools.
REMOVAL OF THE GAS CYLINDER
1.Turntheburnercontrolknobto“OFF”position.
2.Graspthegrillhandlenearesttotheregulatorwithonehand,andturnthecylinder
counterclockwiseuntilitcomesoff.
34
English

Related product manuals