06 SUPERHERO CARPET SHAMPOOER
The appliance should be switched o and
disconnected from the mains supply.
Never operate without lters as damage to
appliance could occur.
2. Preparing the Appliance
a. To remove the clean water tank, hold the handle
and press the ‘release’ button.
See g. 4.
b. Unscrew the measuring cap from the reverse
side of the clean water tank. Fill measuring cap
with solution (one full cap of solution per full
tank) and pour into tank.
See g. 5.
c. Fill remainder of clean water tank with warm
(max 40ºC) tap water. Replace cap.
See g. 6.
d. Place bottom of clean water tank into carpet
washer and push back until it locks into place.
See g. 7.
g . 4
g . 5
g . 6
g . 7
To Next Page