SUPERHERO CARPET SHAMPOOER
07
Plug the cord into an electrical socket. Turn on the
appliance by using the on/o switch located on the
side of the appliance.
IMPORTANT: Never leave the appliance
unattended with the power on. Turn off when
emptying and lling tanks. Do not oversaturate
the carpet.
3. Using the Appliance
a. Step onto the release pedal to put the appliance
into cleaning position. While depressing the
solution spray trigger, pull carpet washer in
a backward motion. Release the trigger and
push the appliance forward in the same path
to agitate and remove dirty water and solution
from carpet.
See g. 8.
b. When dirty water tank is full lift dirty water tank
latch and remove from base unit using the
handle.
See g. 9.
c. Twist dirty water tank outlet cap anticlockwise
and remove, empty, rinse and replace.
See g. 10.
IMPORTANT: For best cleaning results use a
steady, moderate, forward and backward motion.
Always work from back to front across the room
to avoid stepping on wet carpet and lowering
the pile.
g . 8
g . 9
g. 10
To Next Page
Loading...