• 10 •
DISPLAY MESSAGES
CONNECT CLAMPS (No LED lit) – Plugged into the AC outlet without the
clamps connected to a battery.
WARNING CLAMPS REVERSED (No LED lit) – Plugged into the AC outlet
and the clamps are connected backwards to a 6V or 12V battery.
ANALYZING BATTERY (Green LED lit) – Plugged into the AC outlet, and
when rst connected to a 6V or 12V battery correctly.
CHARGING 12V – XX% (Green LED lit) – Plugged into the AC outlet and
correctly connected to a discharged 12V battery.
CHARGING 6V – XX% (Green LED lit) – Plugged into the AC outlet and
correctly connected to a discharged 6V battery.
FULLY CHARGED AUTO MAINTAINING (Green LED pulsing) –
Plugged into the AC outlet and correctly connected to a fully charged
6V or 12V battery.
CHARGE ABORTED-BAD BATTERY (Green LED ashing) –
Circumstances that could cause an Abort situation during charging:
•The battery is severely sulfated or has a shorted cell and can’t reach
a full charge.
•The battery is too large or there is a bank of batteries and it doesn’t reach full
charge within a set time period.
Circumstances that could cause an Abort situation during maintain:
•The battery is severely sulfated or has a weak cell and will not hold a charge.
•There is a large draw on the battery and the charger has to supply its maximum
maintain current for a 12 hour period to keep the battery at full charge.
MAINTENANCE AND CARE
A minimal amount of care can keep your battery charger working properly for years.
•Clean the clamps each time you are nished charging. Wipe off any battery
uid that may have come in contact with the clamps, to prevent corrosion.
•Occasionally cleaning the case of the charger with a soft cloth will keep the nish
shiny and help prevent corrosion.
•Coil the input and output cords neatly when storing the charger. This will help
prevent accidental damage to the cords and charger.
•Store the charger unplugged from the AC power outlet, in an upright position.
•Store inside, in a cool, dry place. Do not store the clamps clipped together, on
or around metal, or clipped to the cables.
To Next Page
Loading...