Super Start SPSS3-CA - Features; Grounding and Ac Power Cord Connections

• 5 •
FEATURES
1. AC Power cord
2. Digital display
3. Display/ON button
4. Charging/Charged/
Maintaining LED indicator
5. Hook attachment
6. Battery clamp
quick-connect
7. 12V accessory plug
quick-connect
8. Ring terminal
quick-connect
1
2
3
4
5
6
7
8
GROUNDING AND AC POWER CORD CONNECTIONS
This battery charger is for use on a nominal 120 volt circuit. The electrical
outlet must be properly installed and grounded in accordance with all local
codes and ordinances. The plug pins must t the receptacle (outlet). Do not
use with an ungrounded system.
NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not allowed
in Canada. Use of an adapter plug in the United States is not recommended and
should not be used.
USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
•Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
•Ensure that the extension cord is properly wired and in good electrical condition.
•Wire size must be large enough for the AC ampere rating of charger,
as specied below:
Length of cord (feet): 25 50 100 150
AWG* size of cord: 18 18 16 14
*AWG-American Wire Gauge