Super Steam X5 - HOW TO USE THE SUPER STEAM X5 UNIT

SUPER STEAM X5 45
HOW TO USE THE SUPER STEAM X5
PLEASE READ BEFORE USE
The SUPER STEAM X5 is designed to thoroughly clean oor sur-
faces, such as marble, ceramic, carpet, stone, linoleum, and sealed
hardwood oors and parquet. Not all oor types are suitable for
steam cleaning.
The heat and steam acon my remove the wax on surfaces treat-
ed with wax. Do not use on unsealed ooring or let unit stand on
any wood or heat sensive oor for an extended period of me.
This could cause the wood grain to rise, in addion to other types
of damage.
When using on vinyl, linoleum or any other heat sensive oors,
use extra cauon. Too much heat can melt glue in the ooring. Use
only on laminated ooring that has been laid professionally and
without any gaps or cracks that would permit the entry of moisture.
Test the SUPER STEAM X5 on a small isolated area of your oor-
ing prior to overall use on any oor surface.
Always check the use and care instrucons of your ooring man-
ufacturer or distributor before using the SUPER STEAM X5.
When in doubt, please consult a ooring specialist. Only use the
carpet glider on carpeng and rugs. Use of the carpet glider on other
oor surfaces will cause streaking and possibly scratching.
This product emits steam and creates moisture. Water marks,
discoloraon or damage to the oor surface can occur if the unit is
le operang too long in one place.