Need help?Do you have a question about the Superabrasive Lavina Elite L30GE and is the answer not in the manual?
Details the warranty terms and conditions for Lavina E machines, including coverage and exclusions.
Outlines the procedures and terms for returning Lavina E machines, including authorization and conditions.
Information about Superabrasive, its history, and its position in the industry.
Provides an overview of the Lavina E machine's intended use and capabilities.
Describes the main components and features of the Lavina E machine.
Details the specific design elements of the Lavina 30GE model, including its components.
Specifies the recommended operating temperature and conditions for the Lavina E machine.
Information on vibration levels and compliance with standards.
Information on noise emission levels and compliance with standards.
Describes the information found on the machine's labels.
Contact information and support channels for customer assistance.
Specifies the intended applications and proper usage of the Lavina 30GE machine.
Lists applications and environments where the machine must not be used.
Steps to take before operating the machine to ensure safety and proper function.
Details the safety devices integrated into the machine and their importance.
Describes the machine's safety functions for stopping operation.
Highlights general safety risks and precautions for operating the machine.
Essential safety guidelines and hazards related to propane usage.
Precautions and awareness regarding fire and explosion risks associated with propane.
Information on emissions produced by the machine and potential hazards.
Requirements for hazard communication, such as MSDS posting.
Overview of regulations and standards from various agencies affecting propane machine use.
Identifies inherent risks that remain even with proper operation and maintenance.
Critical checks and preparations required before starting machine operation.
Guidelines for safe and effective operation of the Lavina 20G-X machine.
Information on testing for toxic gases and instrument selection.
Responsibilities and qualifications required for the machine operator.
Details on propane cylinder types, safety, and usage requirements.
Proper procedures and precautions for refuelling propane cylinders.
Guidelines for the safe storage of propane cylinders.
Safety instructions for transporting propane cylinders and machines.
Instructions on how to adjust the machine's handle for optimal posture and control.
Steps to safely transition the machine from operational to tool mounting stance.
Procedures for safely lifting the machine using cranes or other equipment.
Guidelines for storing the machine to prevent damage and ensure longevity.
Essential checks to perform before starting the machine's operation.
Comprehensive guide to the SM40 Fuel-Minder system, its components, and features.
Feature for displaying battery voltage and troubleshooting charging system issues.
Displays engine speed (RPM) for assessing performance and tooling needs.
A timer feature to track job duration and work area efficiency.
Enables setting a password to prevent unauthorized service alert resets.
Provides equipment-specific alerts for scheduled maintenance tasks.
Describes the automatic sleep mode to conserve battery life during inactivity.
Guide to navigating the Fuel-Minder's main menu and interacting with features.
Explains LED alerts and how to reset service intervals on the Fuel-Minder.
Instructions for accessing and using the Fuel-Minder's options menu and its various settings.
Description and use of the tool holder key for mounting and dismounting.
Information on the security plate used with Quickchange pads.
Important note regarding tampering with the emission control system.
Identification of mechanical parts subject to wear and requiring replacement.
Guidelines for cleaning the machine and its components.
Daily maintenance checks required every hour of operation.
Daily visual inspection procedures for the machine and its parts.
Initial maintenance required after the first 8 hours of machine operation.
Maintenance tasks to be performed every 50 working hours.
Maintenance tasks to be performed every 200 working hours.
Maintenance tasks to be performed every 400 working hours.
Checks related to the vacuum system and potential clogging.
Importance of addressing water leaks promptly to prevent machine damage.
General note on mechanical parts subject to wear and needing replacement.
Troubleshooting common engine issues like surging idle and stalling.
Procedures for checking and changing engine oil, including intervals and oil type.
Explains warranty rights and obligations for the California emission control system.
Details the warranty coverage period and terms for the emission control system.
Outlines the owner's responsibilities for maintenance and warranty claims.
Covers the general warranty for the equipment's compliance and defect-free construction.
Lists parts and specifications for assembling the Lavina 30GE, including general and bumper parts.
Lists components and part numbers for the machine's control board.
Lists components and part numbers for the control board with throttle cable.
Part list and specifications for the Lavina 30GE carriage assembly.
Part list and specifications for the Lavina 30GE wheel assembly.
Part list and specifications for the Lavina 30GE water pump.
Part list and specifications for the Lavina 30GE water ball valve.
Part list and specifications for the Lavina 30GE water pump regulator.
Part list and specifications for the Lavina 30GE water tank assembly.
Part list for the water installation components of the Lavina 30GE.
Part list and specifications for the engine base components of the Lavina 30GE.
Part list and specifications for the Lavina 30GE guard assembly.
Part list and specifications for the Lavina 30GE top cover.
Part list and specifications for the Lavina 30GE top cover assembly.
Part list for the first bottom cover assembly of the Lavina 30GE.
Part list and specifications for the planetary drive components of the Lavina 30GE.
Part list and specifications for the Lavina 30GE pulley unit assembly.
Part list for the second bottom cover assembly of the Lavina 30GE.
Part list and specifications for the Lavina 30GE tool holder components.
Part list for the Kawasaki FX600V engine used in the Lavina 30GE.
Lists optional parts and assemblies available for the Lavina 30GE machine.
General| Brand | Superabrasive |
|---|---|
| Model | Lavina Elite L30GE |
| Category | Floor Machine |
| Language | English |
To Next Page
