Superchips Pulsar LT - Speed Limiter Adjustment; TPMS Adjustment; Tire Size Input

11
STEP 1 - Access the Programming Menu.
STEP 2 - Using +RES or -SET, select mode 20 (MPH)
STEP 3 - Use the +RES or –SET wheel to adjust to the
desired value between 1 and 99 (PSI).
STEP 4 - Press cancel cruise to select.
STEP 5 - Speedometer sweeps to 140 MPH for 3 seconds
indicating TPMS has been selected.
STEP 1 - Access the Programming Menu.
STEP 2 - Using +RES or -SET, select mode 10 (MPH).
STEP 3 - Use +RES or -SET wheel to adjust to the desired value.
STEP 4 - Press the cancel cruise control button to save the input
value.
STEP 5 - The speedometer will sweep to 140 MPH indicating the
function is complete.
Speed Limiter
TPMS - Tire Pressure Monitor System
After adjusting the TPMS inate to number, the min amd max values
automatically adjust. This mode reprograms the vehicle ECM.
After accessing speed limiter programming mode, adjustment between 82
and 140 MPH can be input.
Tire Size
Input Stock and Modied Tire Size.
STEP 1 - Access the Programming Menu.
STEP 2 - Using +RES or -SET, select mode 30 (MPH)