Superlux UK82 - Receiver Operation

5
1. Power ON / OFF
Power ON: Press the power “ON / OFF” button to turn on the power. The LCD lights
up.
Power OFF: Press the power ON / OFF button for 3 secs to turn off the power. The
LCD lights out.
2. Change the frequency point
Press the “UP / DOWN” button to increase or decrease the frequency. After changing
the frequency, the related channel indication ashes. Press “SYNC” button to conrm
the change. Then turn on the handheld microphone, align the LCD of the handheld
microphone to the IR window of the receiver. Press the “SYNC” button of the receiver
again and wait for 5 seconds. After that, the frequency of the handheld microphone
will be automatically synchronized to the frequency of the receiver (host). Now
“change the frequency point” procedure is completed.
3. Lock and unlock the receiver
When the power is on, press the “FUN” button on the left and right side for three
seconds until the LCD screen lights up to lock and unlock the receiver. When the
receiver is locked, there will be lock sign on the LCD screen. The lock sign will disap-
pear when unlock. It is only able to do turn ON / OFF under the locked condition. The
other operations are not allowed under the locked condition.
4. Automatically search the unoccupied channel
Press “FUN” button for 3 seconds and the frequency and the channel sign start to
icker. Press “CH-” or “CH+” button to search the unoccupied channel automatically.
When the phase of searching the unoccupied channel is completed, the “SCAN” sign
will show up on the LCD screen. Then turn on the handheld microphone, align the
LCD screen of the handheld microphone to the IR window of the receiver (host) to
complete IR frequency pairing.
RECEIVER OPERATION