3-2
Super AOC-STG-b4S Add-on Card User's Guide
3-2 Before Installation
Before you install the add-on card, follow the instructions below.
1. Power down the system.
2. Unplug the power cord.
3. Use industry-standard anti-static equipment such as gloves or a wrist strap
and follow the precautions on page 3-1 to avoid damage caused by ESD.
4. Familiarize yourself with the server, motherboard, and/or chassis documenta-
tion.
5. Conrm that your operating system includes the latest updates and hotxes.
3-3 Installing the Add-on Card
Follow the steps below to install the add-on card into your system.
1. Remove the server cover and, if necessary, set aside any screws for later
use.
2. Remove the add-on card slot cover. If the case requires a screw, place the
screw aside for later use.
3. Position the add-on card in the slot directly over the connector on the mother-
board, and gently push down on both sides of the card until it slides into the
PCI connector.
4. Secure the add-on card/motherboard to the chassis. If required, use the
screw that you previously removed.
5. Attach any necessary external cables to the add-on card.
6. Replace the chassis cover.
7. Plug the power cord into the wall socket, and power up the system.
To Next Page
Loading...
Need help?
General
