Supermicro AOC-STG-b2T - Page 21

3-5
Chapter 3: Installation
1. Download libbnxt_re-<ver>.tar.gz
2. Install the library by entering following commands:
tar xvzf libbnxt_re-<ver>.tar.gz
cd libbnxt_re-<ver>
sh autogen.sh
./congure –sysconfdir=/etc
make
make install
cp bnxt_re.driver /etc/libibverbs.d
echo “/usr/local/lib” >> /etc/ld.so.conf
ldcong –v
For more driver installation information, please refer to Intel Support website.
Windows Drivers
Follow the steps below to install the drivers on the Windows operating system.
Installing Drivers for the Windows Operating System
1. From the FTP site or CDR-NIC LAN driver CD, go to the following directory:
Broadcom > Windows.
2. Choose the desired Windows driver package folder.
3. As the drivers are in .inf format, you can install the driver from the Device
Manager.