A-1
Appendix A
LED Descriptions
This appendix covers LED descriptions for the blade enclosure and other module
components.
A-1 MBM-GEM-001 Gigabit Ethernet Module LED
Descriptions
MBM-GEM-001 Gigabit Ethernet module LEDs are described below in Table A-1.
Table A-1. MBM-GEM-001 Gigabit Ethernet Switch LED Indicators
LED State Description
Module Initiation OK
LED
Steady On
The MBM-GEM-001 GbE switch module is operational and has
passed the POST (Power-On Self-Test) with no critical faults.
Module Fault LED
(Red)
Steady On
When lit, this LED indicates that the GEM-001 GbE switch
module has either failed the POST or has detected an
operational fault within the module. When this LED is lit, the
fault LED on the blade enclosure will also turn on.
Link/Activity Ethernet
Port Status LED
Solid Green This indicates that the link is established, no activity
Blinking Green
This indicates that data is being transmitted (Tx) or received
(Rx)
Off This indicates that no link is established
Speed Ethernet Port
Status LED
Amber Connection speed of the port is 1 Gb/sec
Green Connection speed of the port is 100 Mb/sec
Off Connection speed of the port is 10 Mb/sec
To Next Page
Loading...