Chapter 1: Introduction
1-5
H8DA8-2/H8DAE-2 Quick Reference
Jumpers Description Default Setting
J3P 3rd Power Fail Detect En/Dis Closed (Enabled)
JBT1 CMOS Clear See Section 2-7
JCF1 Compact Flash Master/Slave Closed (Master)
JD1 Onboard Speaker Pins 6-7 (Enabled
JI
2
C1/2 I
2
C to PCI Enable/Disable Closed (Enabled)
JPA1 SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2/JPA3 SCSI Channel A/B Term. Open (Enabled)
JPI1 IEEE 1394 Enable/Disable Pins 1-2 (Enabled)
JPUSB USB Power Select Pins 1-2 (Standard Pwr)
JPX1A/JPX2A PCI-X Slot #1/2 Freq. Select Open (Auto)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
1394_1/1394_2 IEEE 1394 (Firewire) Headers
Audio_FP Audio Output
CD1 Audio In for CD
COM1, COM2 COM1/COM2 Serial Ports
FAN 1-8 System Fan Headers
IDE#1 IDE Drive Connector
J32 4-pin Auxiliary Power Connector
JA1/JB2 U320 SCSI Channel A/Channel B Connector
JAR Power Fail Alarm Reset Header
J137 Audio Ports
JD1 Onboard Speaker/Keylock/Power LED
JF1 Front Panel Connector
JFDD1 Floppy Disk Drive Connector
JL1 Chassis Intrusion Header
JLAN1/2 Gigabit Ethernet (RJ45) Ports
JOH1 Overheat Warning Header
JPI
2
C Power Supply I
2
C Header
JPW1 24-Pin ATX Power Connector
JPW2 8-Pin Processor Power Connector
JPWF 3rd Power Supply Alarm Header
JSMB System Management Bus Header
JWF1 Compact Flash Card Power Connector
JWOL, JWOR Wake-On-LAN, Wake-On-Ring Headers
SATA0 ~ SATA5 Serial ATA Ports
SGPIO1/SGPIO2 SGPIO Headers
SIM1U IPMI 2.0 Card Slot
USB0/1/2/3 Universal Serial Bus (USB) Ports 0/1/2/3
USB4/5, USB6/7 USB Headers
To Next Page
Loading...