2-22
H8DA8-2/H8DAE-2 User's Manual
2-8 Onboard Indicators
JLAN1/JLAN2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each Gb LAN port, one LED indicates
activity while the other LED may be
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
JLAN LED
(Connection Speed Indicator)
LED Color Defi nition
Off 10/100 Mbps
Amber 1 Gbps
SCSI Activity LEDs
(H8DA8-2 only)
When illuminated, the DA1 and DA2
LEDs indicate activity on SCSI chan-
nels A and B, respectively. These
LEDs are located near the SCSI con-
troller chip. See the table on the right
for LED states.
SCSI Activity LEDs
(DA1, DA2)
State System Status
On SCSI channel active
Off SCSI channel inactive
Onboard Power LED
DP4 is an Onboard Power LED. When this
LED is lit, it means power is present on the
serverboard. In suspend mode this LED
will blink on and off. Be sure to turn off the
system and unplug the power cord(s) be-
fore removing or installing components
Onboard Power LED
(DP4)
State System Status
On Standby power present on
serverboard
Off No power connected
Flashing System in standby state
To Next Page
Loading...