Supermicro Supero H8DA8-2 - Page 69

Chapter 4: BIOS
4-15
 IPMI Confi guration
 View BMC System Event Log
Pressing the Enter key will open the event log. Use the "+" and "-" keys to
navigate through the system event log.
Clear BMC System Event Log
Selecting this and pressing the Enter key will clear the BMC system event
log.
 Set LAN Confi guration
Use the "+" and "-" keys to choose the desired channel number.
 IP Address
Use the "+" and "-" keys to select the parameter. The IP address and current
IP address in the BMC are shown.
 MAC Address
Use the "+" and "-" keys to select the parameter. The MAC address and cur-
rent MAC address in the BMC are shown.
 Subnet Address
Use the "+" and "-" keys to select the parameter. The subnet address and
current subnet address in the BMC are shown.
 Set PEF Confi guration
PEF Support
Use this setting to Enable or Disable PEF support. If enabled, the following
PEF settings will appear.
PEF Action Global Control
Options are Alert, Power Down, Reset Sysytem, Power Cycle, OEM Action
and Diagnostic Int..
Alert Startup Delay
Use this setting to Enable or Disable the alert startup delay.